TS12012: A 0.8V/1.5µA NANOPOWER REFERENCE/OP AMP/COMPARATOR IN TDFN22EP-10
TYPICAL APPLICATION CIRCUIT
- Low-Frequency, Local-Area Alarms/Detectors
- Smoke Detectors and Safety Sensors
- Infrared Receivers for Remote Controls
- Instruments, Terminals, and Bar-Code Readers
- Battery-powered Systems
- Smart-Card Readers
- Internal 0.6V Reference
- Op Amp and Comparator Input Ranges are Rail- to-Rail
- Unity-gain Stable Op Amp with AVCL = 110dB
- Op Amp Output: Rail-to-Rail and Phase-Reversal- Free
- 20µs Comparator Propagation Delay
- Resettable Latched Comparator
- TS12012: Push-pull Rail-to-Rail Output Stage with Crowbar-Current Free Switching
KEY SPECIFICATIONS – TS12012
tpd+ / tpd-
|1k Price||Order Free Samples|
The TS12011 and the TS12012 combine a 0.6V reference, a 20µs analog comparator, and a unity-gain stable operational amplifier in a single package. Both devices operate from a single 0.8V to 2.5V power supply and consume less than 1.5µA total supply current. Optimized for ultra- long life, single-cell and battery-powered applications, these devices expand Touchstone’s growing “NanoWatt Analog™” high-performance analog integrated circuits portfolio.
Both the analog comparator and the op amp feature rail-to-rail input stages. The analog comparator exhibits ±7.5mV of internal hysteresis for clean, chatter-free output switching. The TS12011 output stage is push-pull where as the TS12012’s output stage is open-drain for mixed-voltage system applications. The internal reference was designed to sink or source up to 0.1µA load currents. When compared against similar products, the TS12011 and the TS12012 offer a factor-of-20 lower power consumption and at least a 55% reduction in pcb area.
The TS12011 and the TS12012 are fully specified over the -40°C to +85°C temperature range and each is available in a low-profile, 10-pin 2x2mm TDFN package with an exposed back-side paddle.
PIN ASSIGNMENTS / PACKAGE OUTLINES
RoHS/Pb-free Packaging Information: Touchstone Semiconductor supplies only lead-free packaging.
ORDERING INFORMATION AND PRICING
|Part Number||Status||VDD (V)
|TS12011ITD1022TP||Active||0.65||+2.5V||1||TDFN22EP-10||1 Unit/Tape & Reel||-40°C to +85°C||$1.70||Check Inventory|
|TS12011ITD1022T||Active||0.65||+2.5V||1||TDFN22EP-10||3000 Units/Tape & Reel||-40°C to +85°C||$1.70||Check Inventory|
|TS12012TD1022TP||Active||0.65||+2.5V||1||TDFN22EP-10||1 Unit/Tape & Reel||-40°C to +85°C||$1.70||Check Inventory|
|TS12012ITD1022T||Active||0.65||+2.5V||1||TDFN22EP-10||3000 Units/Tape & Reel||-40°C to +85°C||$1.70||Check Inventory|
Nota bene: The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (USD or US$, FOB USA per unit for the stated volume), and is subject to change without notice. Quantity pricing may vary substantially. International prices may differ because of local duties, taxes, fees, and currency exchange rates. For volume-specific pricing information and/or delivery quotes, please contact your local Touchstone Semiconductor manufacturer’s sales representative or authorized distributor.