TS3310: A True 150-nA IQ, 0.9-3.6VIN, Selectable 1.8-5VOUT, High-Efficiency Instant-ON™ Boost Converter


Product Image
Product Image


  • Coin Cell-Powered Portable Equipment
  • Single Cell Li-ion or Alkaline Powered Equipment
  • Solar or Mechanical Energy Harvesting
  • Wireless Microphones
  • Wireless Remote Sensors
  • RFID Tags
  • Blood Glucose Meters
  • Personal Health-Monitoring Devices
  • ZigBee Radio Enabled Devices
  • Low-energy Bluetooth Radio Enabled Devices


  • Ultra-Efficient Boost Converter:
    Active-mode, No-load Supply Current: 150nA
    Efficiency: Up to 92%
    Input Voltage Range: 0.9V-3.6V
    Delivers up to 35 mA at 3VSTORE from 1.2VIN
    Single-inductor, Discontinuous Conduction Mode Operation
    No External Schottky Diode Required
  • Pin-Selectable Output Voltages:
    1.8V, 2.1V, 2.5V, 2.85V, 3.0V, 3.3V,
    4.1V, and 5.0V
  • Output Power Good Indicator
  • User-enabled Secondary Output Load Switch
  • 10-Pin, Low-profile, 2mm x 2mm TDFN Package

Check Price and Availability


Part Number VIN (V) Range Pin-Selectable
VOUT (V) Range>
Active-Mode, No Load ISY (nA) Boost Efficiency (%) Output Current (mA) External Components Order Free Samples
TS3310ITQ1633T 0.9-3.6 1.8-5.25 150 92 50 1 Inductor
+3 Capacitors
Request Here


The TS3310 is a low power boost converter with an industry-leading low quiescent current of 150nA, enabling ultra long battery life in systems operating from a variety of battery sources. The TS3310 is the industry’s only boost converter to specify its no-load supply current with an actively switching boost engine, providing a more accurate picture of supply current during normal operation. The TS3310 boosts input voltages from 0.9V-3.6V to one of eight user-selectable output voltages ranging from 1.8V to 5.0V. The TS3310 includes two outputs: (a) an always-on primary output and (b) a user-enabled, load-switched secondary output designed to power burst-on loads operating at low duty cycles, such as a ZigBee radio. The TS3310 external component count includes 1 inductor and 3 capacitors – design of its boost regulator does not require an external rectifier diode, thereby saving additional system cost. The TS3310 operates in discontinuous conduction mode with an on-time proportional to 1/VIN, thereby limiting the maximum input current by the selection of the inductor value, ensuring the boost start-up current does not cause the input source to sag.

The extremely low quiescent current combined with a secondary output load switch makes the TS3310 an ideal choice for applications where a burst-on load can be periodically powered from the switched output. In this way, the burst-on load is disconnected from the output storage capacitor when it is turned off, preventing the burst-on load’s leakage current from discharging the output storage capacitor.

The TS3310 is fully specified over the -40°C to +85°C temperature range and is available in a low-profile, thermally-enhanced 10-pin 2x2mm TDFN package with an exposed back-side paddle.


Product Image

RoHS/Pb-free Packaging Information: Touchstone Semiconductor supplies only lead-free packaging.


Part Number Status VDD (V) IDD
VOS (mV)
/Pin Count
TS3310ITD1022TP Active 0.9-3.6 1.8-5 150 TDFN22-10EP 1 Unit
/Tape & Reel
-40°C to +85°C $0.99 Check Inventory
TS3310ITD1022TP Active 0.9-3.6 1.8-5 150 TDFN22-10EP 3000 Units
/Tape & Reel
-40°C to +85°C $0.99 Check Inventory

Nota bene: The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (USD or US$, FOB USA per unit for the stated volume), and is subject to change without notice. Quantity pricing may vary substantially. International prices may differ because of local duties, taxes, fees, and currency exchange rates. For volume-specific pricing information and/or delivery quotes, please contact your local Touchstone Semiconductor manufacturer’s sales representative or authorized distributor.